ETC Controls

ETC Accessories

We use various to meet both your application and budget requirements. Click on images for additional information.

The ATS Display Panel displays settings, voltages, currents, KW, PF, and status within the controllers. It also programs features, settings, and operating parameters within the PMCP Controller and monitors settings within the Mini Controller. Panel comes in flush and surface mount.

The MTM Display Panel is the same as the ATS Display Panel except the indicator LEDs shall display the status of M1, M2, S1, S2, TIE, Auto/Manual, and Alarm/Lockout. Panel comes in flush and surface mount. To view the Main Tie Main Display Panel click here.

The Power Option PCB is required for the PMCP to measure 3-phase current, power factor, and KW of the load. Just plug the Power Option PCB into a connector on the PMCP, program in the CT Ratio and you're ready to go.....It's that simple.

The Breaker Add-On Panel is used with the PMCP Controller for operating Breaker Pair Transfer Schemes. The transfer modes can be Open, Closed, Soft Load, Delayed, Load Dump, and Load Disconnect when used with the PMCP.

The Universal Add-On Panel (UAP) is used with the PMCP for controlling a solenoid operated Automatic Transfer Switch in various transfer modes: Closed (CTTS), Delayed (DTTS), Soft Load (STTS), Load Dump (Add/Shed Load), and Load Disconnect. The UAP can be configured or re-configured in the field by changing the arrangement of the jumper wires.


ETC Network Configuration

The ETC SCADA provides annunciation, programming, and control of multiple PMCP Controllers on the RS485 communication ETC Network. The SCADA PC also monitors the status of the Pre/Shutdown Alarms of the Engine via I/O Module. A total of 128 devices can easily be monitored with the PC and still maintain a fast update speed. The screens of the SCADA are user friendly and highly visible.

The RS485 Communication PCB provides the PMCP Controller with the means to communicate over the Network (Modbus format).

The I/O Module provides digital inputs to monitor Alarm/Pre-Alarm outputs of the Engine. The digital data is sent to the Scada PC over the RS485 Network, to be displayed on the Engine Screen. The I/O Module also provides 3 Form-A dry contacts that are activated from the Scada. These contacts can be used for activating other devices or running the Engine.

The Accessory Panel can be configured for various ATS applications: Load Dump, Load Disconnect, and CTTS Upgrades.

The MTM Status Control Panel provides monitoring, programming, and control of the MTM Transfer Scheme locally or remotely.

The ETC Laptop Software installs on a standard laptop and converts the laptop into a portable Scada for accessing data and programming settings within the controllers via RS232 Port or the USB port. Run the Laptop Demo to view screens.

The Handheld Programmer displays settings, voltages, currents, KW, PF, and status within the controllers. It also programs features, settings, and operating parameters within the PMCP Controller and monitors settings within the Mini Controller. he ATS Scada PC